A part wrap covers a section of your van, typically the rear doors, lower panels, or both sides below the window line. A full van wrap covers the entire exterior, including the roof if specified. Both use the same cast vinyl film applied directly to the bodywork, but the coverage, cost, and visual impact differ significantly.
For tradespeople running a van around Birmingham and the surrounding areas, the choice comes down to one question: how much branding do you need to do your marketing job on the road? A van sitting outside a job in Solihull or stuck in traffic near West Bromwich is a moving billboard, and the more of it that carries your brand, the harder it works for you.
Typical UK trade van part wraps run from roughly £300 to £700 depending on coverage and the complexity of the design. That usually buys you branded rear doors, a side panel section, or a combination of both. It leaves the original factory paint showing on uncovered panels, which is fine if the van is a neutral colour that does not clash with your brand colours.
A part wrap suits sole traders and small businesses who want a professional, clean look without committing to a full rebrand. If you already use van signwriting for your contact details and want to add a colour panel for visual punch, a part wrap can combine with cut vinyl lettering for a strong result at a controlled cost. The limitation is visibility on the move: a partial wrap is most effective when the van is stationary or slow-moving, rather than travelling at speed past other drivers.
Full wraps on a standard medium-wheelbase van typically fall in the range of £1,500 to £3,000 in the UK, with the figure varying by vehicle size, panel condition, design complexity, and the grade of vinyl used. Premium cast vinyl films from established manufacturers such as Avery Dennison cost more per square metre than entry-level calendared film, but they conform better to curves and door recesses and hold colour longer.
For a Birmingham tradesperson running a van across the city and into neighbouring areas like Dudley, Walsall, or Tamworth, a full wrap turns every journey into brand exposure. The van becomes instantly recognisable at distance, which matters when you rely on local reputation and repeat custom. A full wrap also protects the factory paintwork underneath, which can help preserve residual value when you come to sell or return the vehicle, provided it is removed carefully.
Commercial vehicle wrapping at the full-coverage level is generally the better choice for fleet managers who want all vans looking identical, because matching colours and graphics is far more reliable in vinyl than in paint.
Value depends on how you measure it. If you are a sole trader with one van and a tight budget, a well-designed part wrap combined with quality van graphics for your name, trade, and phone number will outperform a cheap or poorly designed full wrap every time. A cluttered full wrap in faded or badly applied vinyl does more harm than good to a brand.
If you run two or more vans, the maths shifts. The cost per van for a fleet wrapping and branding project typically falls as the number of vehicles rises, and the consistency you get across a fleet is difficult to achieve any other way. Tradespeople operating across Birmingham and nearby towns such as Sutton Coldfield, Halesowen, or Stourbridge find that a uniformly branded fleet signals an established, reliable business, which helps when tendering for larger contracts.
For a single van where every pound counts, here is a straightforward way to think about it:
If a wrap changes what appears to be the main colour of your vehicle, the GOV.UK guidance on updating your V5C is worth reading before you commit to the design. The rules around wraps and colour declarations are not always straightforward, so check directly with the DVLA if you are unsure whether your planned wrap would need to be recorded on the registration document. A good installer will raise this with you before the job starts.
Whether you are weighing up a part wrap for a single van or planning a full rebrand across a fleet, we can help you work out what makes sense for your budget and business goals. Contact us for a free local quote and we will give you a straightforward breakdown of your options without any pressure.
We will show you the options on your vehicle before you decide.
Related
Turn your van into a moving advertisement with a professionally fitted vinyl wrap.
See detailsWe wrap all types of commercial vehicles across Birmingham, including panel vans, Luton box vans, pickup trucks and refrigerated vehicles.
See detailsWe brand entire fleets of commercial vehicles in a consistent livery, from two vans to dozens of vehicles across the West Midlands.
See detailsMore advice
Cut vinyl lettering and printed vehicle graphics both have a place on trade vans - but they suit different budgets, brands and jobs. Here's how to choose the right option for your business.
Read more 9 November 2026Running a fleet in Birmingham? This guide covers the key decisions local business owners and tradespeople face when planning vehicle signwriting, from choosing between wraps and cut vinyl to keeping a multi-van fleet looking consistent.
Read more 26 October 2026Autumn leaves and tree sap are two of the most overlooked threats to trade van graphics. Here is what they do to vinyl wraps and how to protect your branded vehicle through the colder months.
Read more